Characteristic:

Pneumatic shock proof table with low noise air compressor.

Strong metal frame structure.

The stability and balance of the four corners can be automatically adjusted by the flow air pressure suspension device.

Stainless steel tabletop to prevent glare.

The frame structure is black.

There are protective fences at the front and rear to prevent hands from touching the floating platform directly.

The optional net loads are 200kg, 400kg and 800kg.

The four corners of the table are equipped with horizontal feet.

Can be customized according to customer requirements.

VFT-4836 Specification:

Size: 48 "wide x 36" long (120cm wide x 90cm long) bearing capacity: 200kg

Shockproof effect:

Min load @ 20 psi max load @ 80 PSI

Vertical eigenfrequency 1.9hz vertical eigenfrequency 1.5Hz

Shockproof efficiency @ 5Hz 70% shockproof efficiency @ 5Hz 85%

Shockproof efficiency @ 10Hz 90% shockproof efficiency @ 10Hz 97%

Horizontal LO frequency 2.2Hz horizontal LO frequency 1.2Hz

Shockproof efficiency @ 5Hz 64% shockproof efficiency @ 5Hz 91%

Shockproof efficiency @ 10Hz 90% shockproof efficiency @ 10Hz 97%

VFT series shockproof table, including VFT-4836 introduced above and products with different specifications of 30 ", 36", 60 "and 72" in width, is specially made for probe table, and its shockproof effect is far better than that of ordinary optical microscope. For example, when the laboratory is located on the upper floor and the building vibrates greatly, it is equipped with VFT series shock proof table to achieve such shock proof performance: when the objective lens is 100 times and the zoom is twisted to 2x, the image is displayed on the 17 inch display by CCD, and the conversion rate can reach 4000 times (including the display area magnification). At this time, the probe table is placed on the shock proof table in the work, No jitter! If the probe (soft needle) is on the mini pad made by FIB, the probe will not shift after one hour.